BPG Deadair Suppressor Cover

$200.00

The Deadair Silencers Suppressor Covers are made specifically to fit their suppressors.

If you’d like to order a Deadair Branded BPG Suppressor cover, please visit the Deadair webstore.

If you do not find your desired cover / suppressor model on their website or listed below, it’s not available. You will have to custom order it from us with our logo.

If the suppressor cover size you need is not listed in the SIZE CHART, you will most likely need to order a CUSTOM COVER.

Product Specifications and Use Restrictions

  • Eliminates burns and damaged gear
  • Full Auto Capable up to 1000° F
  • Made in USA with fully FR Materials
  • Patented Design
  • “No slip fit” Guarantee
  • Two part system (Cover + replaceable FR Sleeving) increases product lifetime

Suppressor *

1. Look up your suppressor (or similar if your exact model is not listed) in our Suppressor Cover Size Chart
2. The cover type best suited for your application will depend on you. If you need a Light, Medium, Heavy, or even Custom Cover, go to that product page by clicking on the cover type.
3. Pick the appropriate Cover Length from the “Length” drop down above, and make sure both the length and diameter match the Cover Size Chart or the length best suited for your suppressor configuration, weapon system setup.
Flash Caps / Flow Through Front Ends should be left completely exposed.
QD’s should be covered in most cases to prevent the cover from flying off. You can leave them exposed if the QD is smaller than the suppressor diameter that is being covered.
EXAMPLE: The Deadair Nomad 30 is 1.75″ dia and the KeyMo QD is 1.5″ dia, so in this case, the best cover size would be 6.5″ x 1.75″, leaving the QD Exposed.
**THIS NEXT STEP IS VERY IMPORTANT**
4. If you pick the wrong color, or enter the wrong size, or need a Custom Cover and order a regular one, IT WILL STOP YOUR ORDER, AND WE WON’T SHIP UNTIL WE SPEAK TO YOU.
5. Enter your suppressor details below (make, model, QD type, aftermarket front cap)
**
If you are unsure about which cover you need, please contact us before ordering via our live chat or contact us form

Order Acknowledgement *

BPG may correct any order at their discretion to prevent an RMA exchange.
– Click “YES” below to ACKNOWLEDGE & ACCEPT ORDER TERMS

Find in Store
SKU: BPG-DA-SC Categories: , Tags: , , ,

Description

The Burn Proof Gear Suppressor Cover

Product Description

The BPG Suppressor Cover Heavy is designed to fit suppressors that are 1.5 inches in diameter and can be made to fit any length. All Burn Proof Gear suppressor covers are designed to be 0.5 inches longer than the suppressor itself. This allows the cover to cinch around the front and rear of the suppressor to ensure a “No-Slip Fit.” The Heavy cover is made from aerospace and military grade fire retardant materials. DuPont Kevlar has a maximum operating temperature of 1000° F (roughly 180 shots fired of m855). The second component of the Suppressor Cover Heavy is an inner liner comprised of fiberglass mesh sleeving. Its maximum operating temperature is 2000° F. The Suppressor Cover Heavy is compatible with all calibers suppressors (.223, 300 BLK, .308, 5.56 NATO, 7.62 NATO). Once the cover is installed on a suppressor that is 1.5 inches in diameter, the overall diameter of the suppressor with cover installed should not exceed 1.75 inches. The standard cover sizes range from 6 inches to 9.5 inches long and weighs less than 3 ounces at the shortest configuration and 5.5 ounces at 12.5 inches long. The cover is a two piece design; the inner sleeving which is cut to length and the cover. The covers resist the extreme heat generated from suppressors and enable the operator to transition confidently without burning their legs, pants, or other gear. Additionally, they eliminate heat mirage on precision applications and any IR emitted in night operations. The Burn Proof Gear suppressor covers withstand the most rigorous abuse, are combat proven, Made in the USA, and are lifetime guaranteed.

For installation help: Installation Tutorials

  • Suppressor Cover – Heavy – (Fits 1.5″ Diameter Suppressors)
  • Outer layer Kevlar Fabric (Black, Flat Dark Earth, and Wheat Tan) is rated to 1000° F
  • Suppressor cover in Gray or Multicam is rated to 600° F max temp (not full-auto rated)
  • Inner material is high temp silica rated to 2000° F
  • Safety Disclaimer: allow the cover to cool completely once it is too hot to touch before resuming your firing schedule.

For help placing your order, please contact us: sales@burnproofgear.com

Please Note: If you need the cover right away, you can order via amazon prime or through a dealer.

Additional information

Weight 3 oz
Dimensions 10 × 4 × 1 in
Suppressor

Sierra 5 Xeno FH (5"x1.5"), Sierra 5 Xeno (5.25"x1.5"), Sierra 5 KeyMo FH (6.25"x1.5"), Sierra 5 KeyMo (6.5"x1.5"), Sandman K FH (5.75"x1.5"), Sandman K (6"x1.5"), Lazarus 6 Xeno (6.25" x 1.6"), Lazarus 6 KeyMo (6.75" x 1.6"), Sandman S FH (7"x1.5"), Sandman S (7.25"x1.5"), Wolfman – Short FH (5.25"x1.6"), Wolfman – Short (5.5"x1.6"), Wolfman – Long FH (7.75"x1.6"), Wolfman – Long (8"x1.6"), Nomad (6.5"x1.75"), Nomad L (8.5"x1.75"), Wolverine (7.5" x WTF), Primal (8"x1.6"), Sandman L FH (9"x1.5"), Sandman L (9.25"x1.5"), Nomax 33 (9.25" x 1.75")
Color

,

Reviews

There are no reviews yet.

Be the first to review “BPG Deadair Suppressor Cover”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…

Related products